|
iPac-9302 price is $95.00
|
iPac-9302 Single Board Computer (SBC)
EMAC’s iPac-9302 is an inexpensive Single Board Computer (SBC) based on the Cirrus EP9302 200MHz processor. This ARM9 board is packed with features such A/D, PWM, SPI, multiple GPIO, Serial, MMC/SD card slot, USB Host, and Ethernet, all on a board that is same footprint of a PC/104 module at 3.77" x 3.54". This Industrial Strength SBC is perfectly suited for just about any Embedded Data Acquisition and Control application. The resident flash can be programmed via the internal EP9302 serial bootloader firmware over the RS232 com port or via the JTAG port.
The iPac-9302 has the following features:
- Cirrus Logic EP9302 ARM9 200MHz Processor
- PC/104 Dimensions of 96 mm x 90 mm (3.77" x 3.54")
- External Reset Button
- 8 MB External Flash
- 8 MB External SDRAM
- RS-232 Port
- Internal Real time clock/calendar (no battery backup)
- 16 processor GPIO lines
- 16 PLD output lines - 8 lines are for high drive output lines
- 16 PLD 5 volt tolerant input lines
- SPI/I2S
- Green status LED
- 1 + 2 PWM I/O lines
- 5 channels of 16 bit A/D (0 to 3.3V)
- 10/100 BaseT Ethernet port
- MMC/SD hot-swap socket
- 2 USB 2.0 host ports
Board comes with power supply, serial pigtail cable, and documentation.
When you connect devices to the iPac terminals make sure that you follow the general guidelines from EMAC INC.
The latest manual on the iPac-9302 can be downloaded here.
|
